Most business computers do not fail all at once. A laptop may still handle email and documents but take longer to start, struggle during video calls, or run out of battery halfway through the day.

For many office computers, three to five years is a sensible replacement range. Start reviewing each device when it reaches three years old, then decide whether it should be replaced soon or kept for another year or two.

Some computers will need to be replaced sooner because they cannot install a supported operating system, no longer run important software properly, or require frequent repairs. Others may remain useful beyond five years, especially in roles that only involve light office work.

Age helps you plan, but the computer’s security, condition, and suitability for the employee should determine when it is replaced.

Start Reviewing Computers After Three Years

Business computer manufacturers often base their lifecycle planning on replacement periods of around three or four years. Intel’s current refresh program allows employees using computers older than three years to select a replacement suited to their work, while Dell recommends refreshing business computers every three to four years.

These are planning recommendations rather than fixed expiry dates. A secure, reliable three-year-old laptop does not need to be replaced because of its age alone.

The three-year point is a good time to review the warranty, operating-system support, battery condition, repair history, and the employee’s current requirements. If the computer is likely to remain suitable for another year, record the next review date. If several problems have already appeared, include it in the next replacement order.

Reviewing computers after three years gives the business time to budget and avoids replacing several devices at once.

Security Support Comes First

Before looking at speed or battery life, confirm that the computer can run an operating system that still receives security updates.

Once an operating system reaches the end of support, newly discovered vulnerabilities may no longer be fixed. Security software can still provide some protection, but it cannot correct every weakness in the unsupported operating system underneath it.

The Australian Cyber Security Centre’s current system-management guidance says unsupported operating systems and networked equipment should be removed or replaced. The UK National Cyber Security Centre also recommends replacing obsolete products because continuing to use them increases the risk of compromise.

A computer can be physically reliable and still need replacement because its hardware cannot support a current operating system. In that situation, replacing the hardware is usually safer than continuing to use an unsupported system.

Some software companies offer temporary extended security programs after normal support ends. These programs can give a business more time to complete a planned replacement, but they do not extend the computer’s life indefinitely.

Ask your IT provider to check the support status of every operating system at least once a year. They should also confirm that the computers meet the requirements for future versions before the current one reaches its support deadline.

Match the Computer to the Employee’s Work

An employee who mainly uses email, documents, and browser-based applications may be comfortable using an older computer. Someone working with large spreadsheets, design files, video, engineering software, or several applications at once may need more recent hardware.

Review performance while the employee is completing normal work. A computer may need attention if applications regularly take too long to open, video calls become unstable, or the employee has to close programs before opening another one.

Ask the employee how often the computer interrupts their work. A slow startup once a week is different from delays that happen throughout the day.

Software requirements also change. Accounting systems, security tools, web browsers, and industry applications may stop supporting older operating systems or processors. Even if the application still opens, the software provider may no longer test or support that setup.

Check the hardware requirements before renewing an important application or moving the business to a new platform. This gives you time to identify which computers need an upgrade or replacement before the software changes.

Check the Cause Before Replacing a Slow Computer

Poor performance does not always mean the computer is too old.

A full storage drive, insufficient memory, unnecessary startup programs, malware, overheating, or a damaged operating system can all make a computer slow. A failing storage device may cause similar symptoms and should be dealt with quickly.

Ask your IT provider to identify the cause before approving a replacement. Maintenance, a software repair, additional memory, or a new storage drive may return the computer to normal performance.

The computer’s age and remaining support life still need to be considered. Spending money on an upgrade makes little sense if the device will soon lose operating-system support or if several other parts are already failing.

Include Reliability and Repair Costs

One repair may not justify replacing a computer, but repeated repairs change the calculation.

Unexpected shutdowns, failed updates, charging faults, damaged ports, storage errors, display problems, and recurring operating-system repairs can make a computer unreliable even when each individual issue seems manageable.

Review support requests by device. Add the repair bills, IT support charges, and the time the employee could not work normally. A repair that appears cheaper than a replacement may provide poor value if another problem is likely to follow.

The importance of the employee’s role also affects the decision. A failed computer can be particularly disruptive for someone who travels, meets customers, processes payments, or performs work that cannot quickly be moved to another device.

Keeping a prepared spare computer can reduce that downtime. The spare should still receive updates, run the required software, and be checked regularly.

Consider the Warranty and Availability of Parts

A computer does not automatically need replacement when its warranty expires, but the business becomes responsible for repair costs and may wait longer for service.

Review the warranty before it ends. Check whether an extension is available, what it covers, and how quickly the manufacturer will respond. Compare the price of extended coverage with the age and value of the device.

Manufacturers also limit how long they provide replacement parts and repairs. These periods differ by model, product type, and country, so check the policy for the exact computer rather than relying on a general rule for the brand.

Parts availability matters more when the business does not keep spare devices. A simple repair can still create several days of downtime if a component must be ordered.

A Battery Replacement May Extend a Laptop’s Life

Laptop batteries lose capacity with use and age. A device that once lasted most of the working day may eventually need to stay connected to a charger.

This may not affect an employee who works at a desk, but it can make the laptop unsuitable for someone who travels or works at customer locations.

Replacing the battery may be worthwhile if the computer remains supported, performs well, and is otherwise reliable. Check the full repair cost and whether parts are available before deciding.

Stop using a laptop if the battery is swollen, unusually hot, or changing the shape of the case. A damaged battery should be inspected and replaced by someone with the right equipment and experience.

Decide Whether to Upgrade or Replace

Some computers can be improved by adding memory, replacing storage, or installing a new battery. Others use parts that are difficult or uneconomical to replace.

An upgrade is reasonable when one component is causing the problem and the computer still has several years of security and software support ahead of it. Additional memory, for example, may help an employee who needs to keep several large applications open.

Calculate the complete upgrade cost, including parts, installation, data backup, and testing. Then compare it with the cost and expected life of a replacement.

A new computer will usually include a new warranty and may be easier for your IT provider to manage. An upgrade may still be the better choice when it solves a specific problem at a reasonable cost.

Older Computers Can Be Used in Less Demanding Roles

A computer that no longer suits one employee may still be suitable for another role.

A device used for design or data work could be reassigned to an employee who mainly uses email and browser-based applications. It must still receive security updates, run the required software, and remain reliable.

Before reassigning it, remove the previous employee’s data and accounts. The computer should be reconfigured for the new user, updated, checked for faults, and added to the asset inventory under its new assignment.

Do not reassign a computer that is unsupported or already causing regular support problems. Moving it to another employee only delays the same replacement.

Create a Replacement Schedule

Keep a record of each computer’s purchase date, model, assigned user, warranty expiry, operating system, and expected review date.

When a computer reaches three years old, check whether it can continue receiving security updates, whether it still runs the required applications, and how often it has needed support. Review its battery, warranty, repair costs, and the employee’s workload at the same time.

Assign a planned replacement year based on those findings. Review the date again if the employee changes roles, software requirements increase, or the operating system’s support timetable changes.

Spreading purchases across several budget periods is easier than replacing a large group of computers in one year. It also gives your IT provider time to order, configure, and test the new equipment.

Standardizing on a small number of approved models can simplify the process. Employees can share compatible docks, chargers, and accessories, while your IT provider can maintain consistent security settings and prepare spare devices more quickly.

Different roles may still need different models. A general office computer will not necessarily meet the needs of someone working with video, design, or specialist technical software.

Prepare the New Computer Before Retiring the Old One

Back up or transfer the employee’s business data before removing the old computer.

Confirm that the new device has the required email, documents, bookmarks, applications, printers, and shared folders. Check that multifactor authentication and any specialist software are working before the employee starts relying on it.

Once the move is complete, remove the old computer from device management, security monitoring, backup systems, and trusted-device lists. Cancel or reassign licenses that were tied to it, then update the asset inventory.

Keeping an old computer for a short transition period may be useful. Leaving it connected and unmanaged for months creates more equipment for the business to maintain and secure.

Remove Business Data Before the Computer Leaves

Deleting files or removing the employee’s account does not guarantee that all business data has been erased.

Storage should be sanitized before a computer is sold, donated, recycled, returned, or discarded. The correct method depends on the storage technology, encryption, and sensitivity of the information.

NIST Special Publication 800-88 Revision 2, published in September 2025, provides current guidance on selecting appropriate data-sanitization methods.

The Australian Cyber Security Centre also recommends backing up required information, unlinking accounts, removing removable media, and erasing the device. Businesses handling particularly sensitive information should consider using a professional data-destruction service.

Keep a disposal record containing the computer’s asset number, serial number, disposal date, and the method used to remove its data.

Six Questions to Ask During a Computer Review

1. Can the computer run an operating system that still receives security updates?
2. Does it support the software the employee needs?
3. Does it handle the employee’s normal workload without regular delays?
4. Has it required repeated repairs or support?
5. Is it still covered by a suitable warranty, or are parts readily available?
6. Would an upgrade provide enough useful life to justify its cost?

If the computer fails the security or software-support checks, plan to replace it. For performance and repair issues, compare the cost of fixing the device with the likely cost of keeping it for another year.

Frequently Asked Questions

How many years should a business laptop last?

Three to five years is a practical planning range for many business laptops. Replace one sooner if it becomes unreliable, cannot receive security updates, or no longer meets the employee’s requirements. A supported laptop may remain useful for longer in a less demanding role.

Should every computer be replaced at the same age?

No. Review computers based on their condition and use. A laptop carried between customer sites every day may need replacement sooner than a desktop used occasionally for basic office work.

Is a slow computer always ready for replacement?

No. Low storage, insufficient memory, malware, overheating, or an operating-system problem may be responsible. Have the cause checked before deciding whether to repair, upgrade, or replace the computer.

Should a computer be replaced when its warranty ends?

Not automatically. Review its condition, support status, repair history, importance to the employee, and the availability of spare equipment. The end of the warranty is a suitable time to perform that review.

Can an old computer be kept as a spare?

Yes, provided it remains supported, reliable, updated, and properly managed. Check spare computers regularly and confirm that they can still run the software employees need.

Can a business sell or donate an old computer?

Yes, but all business data must be removed first. Use a suitable sanitization process and keep a record showing how and when the computer was disposed of.

Sources and Further Reading

• Guidelines for System Management: Australian Cyber Security Centre
• Obsolete Products: UK National Cyber Security Centre
• Managing the Risks of Legacy IT: Australian Cyber Security Centre
• Optimizing PC Refresh: Intel
• Dell: PC Lifecycle Plan and Design
• NIST SP 800-88 Revision 2: Guidelines for Media Sanitization
• How to Dispose of Your Device Securely: Australian Cyber Security Centre

Ask your IT provider to review the age, support status, and condition of your business computers. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

If your IT budget only covers computers, Microsoft 365, and the occasional repair, it is probably missing several costs.

Your business may also be paying for software subscriptions, cloud storage, backups, security tools, internet services, phone systems, websites, network equipment, staff training, and outside IT support.

Some of those costs appear every month. Others arrive once a year or only when equipment needs to be replaced. Without a complete budget, an annual renewal or failed computer can become an expense the business did not prepare for.

A detailed IT budget shows what you are paying for now, what will need to be replaced, and which improvements are planned for the year.

There Is No Standard IT Budget for Every Small Business

Online benchmarks often suggest spending a certain percentage of revenue on technology. That percentage may have little connection to what your business needs.

A ten-person law firm, a retailer, and a manufacturing business can have similar revenue but completely different systems. The number of employees, business locations, devices, cloud services, security requirements, and customer obligations all affect the budget.

Consider how much the business depends on each system. If losing internet access would stop customer payments, the internet connection needs more attention than it would in a business that can continue working offline. If employees work with sensitive financial or health information, security and compliance costs may be higher.

Calculate the cost of the systems your business needs first. Revenue-based benchmarks can then provide context, but they should not determine the budget.

Start With a Complete Technology Inventory

You cannot budget properly if you do not know what the business owns and pays for.

Create an inventory of computers, phones, tablets, printers, servers, network equipment, software, cloud services, websites, domains, backup systems, and phone services.

Record who uses each item, what it costs, when it renews, who manages it, and how important it is to the business. Include the supplier, contract term, billing frequency, and account owner.

The NIST Cybersecurity Framework 2.0 Small Business Quick Start Guide recommends maintaining an inventory of hardware, software, systems, and services. It also recommends recording the effect on the business if an important asset becomes unavailable.

Check invoices, company credit cards, bank statements, app stores, and department expenses. Software purchased directly by an employee may not appear in the main IT records.

The inventory may reveal duplicate services, licenses assigned to former employees, equipment that no longer receives updates, or subscriptions that no one uses.

Budget for Computers and Other Equipment

Include every physical device the business expects to purchase or replace during the year.

The cost of a new computer may also include monitors, docking stations, keyboards, headsets, webcams, carrying cases, warranty coverage, and delivery.

The device will need to be prepared before an employee can use it. Setup may include installing software, applying security settings, creating user accounts, transferring data, connecting printers, and testing access to business systems.

Other equipment may include mobile phones, tablets, printers, scanners, payment terminals, security cameras, wireless access points, network switches, firewalls, and battery backup units.

Keep a record of each device’s purchase date, warranty status, operating system, and expected replacement date. Replacing a planned number of computers each year is easier to budget for than waiting until several become unreliable at the same time.

Remember to include spare equipment. A prepared spare laptop can reduce downtime when a device is damaged or fails.

Old equipment also creates costs. Business data must be securely removed before a computer, phone, or storage device is sold, recycled, returned, or discarded.

Include Software and Cloud Subscriptions

List every subscription used by the business.

These may include email and productivity software, accounting systems, customer management platforms, industry-specific applications, electronic signature services, password managers, security software, backup services, cloud storage, device management, website hosting, and domain registrations.

Check whether each service is billed monthly or annually. Several annual renewals arriving in the same month can affect cash flow even when the monthly equivalent appears affordable.

Record the renewal date and current number of licenses. Remove licenses assigned to former employees, unused accounts, and duplicate services. Confirm whether the provider requires a minimum number of users or an annual commitment.

Allow for hiring during the year. A new employee may need more than an email license. They could also require security software, cloud backup, a business phone number, device management, and access to specialist applications.

Storage and usage charges also need attention. Some cloud services charge more when the business stores additional data, sends more messages, adds locations, or uses advanced features.

Review what is included in each subscription. Support, backup, security, data retention, and reporting may require a more expensive plan or a separate service.

Account for Employee Onboarding and Offboarding

A new employee may need a computer, accessories, software licenses, security tools, user accounts, phone services, and setup work. If the role is new, the business may also need additional storage, internet capacity, or specialist software.

When someone leaves, their access must be removed, company information transferred, equipment collected, and software licenses canceled or reassigned. The business may need to preserve email or files for operational, legal, or compliance reasons.

Contractors and temporary staff also create costs. Even when they use their own equipment, they may still need accounts, secure access, software, and support.

Estimate the expected number of new starters and departures during the budget period. Include both the technology and the work required to manage those changes.

Decide How You Will Pay for IT Support

Your business may use a managed IT provider, employ internal IT staff, pay for support when needed, or combine these approaches.

For managed IT services, confirm exactly what the monthly agreement covers. It may include help desk support, monitoring, software updates, device management, user administration, security tools, vendor support, and routine maintenance.

Ask which services are billed separately. Projects, after-hours work, office moves, major upgrades, equipment installation, and support for specialist applications may sit outside the regular agreement.

If you pay for support as needed, review the previous two or three years of invoices. Include emergency work, not just routine maintenance. Check how much was spent after equipment failures, account problems, internet outages, and security incidents.

Internal IT costs may include salaries, benefits, recruitment, training, certifications, and cover during holidays or illness. A single internal employee may still need outside help for specialist projects or serious incidents.

Set Aside Money for Cybersecurity

Cybersecurity spending should be clearly identified in the budget, even when some services are included in your software licenses or IT support agreement.

Your cybersecurity budget may include endpoint protection, email filtering, multifactor authentication, password management, device management, security monitoring, software updates, vulnerability checks, staff training, and incident-response planning.

The correct controls depend on the systems you use, the information you hold, and the damage a security incident could cause.

A business that stores customer payment details or confidential client records may need more protection than one that holds little sensitive data. Regulations, customer contracts, and cyber insurance requirements may also affect what must be implemented.

The NIST Cybersecurity Framework 2.0 covers six areas: governing cybersecurity risk, identifying important systems, protecting them, detecting incidents, responding, and recovering. Use those areas to check whether the budget covers more than preventive security software.

Not every small business needs every security product. Ask your IT provider to explain which controls are recommended, which risks they address, and whether they are already included in another service.

Include Backup and Recovery Costs

Budget for the entire backup and recovery process, not only the storage used to hold backup copies.

Costs may include backup software, cloud storage, isolated copies, monitoring, restore testing, and professional help during recovery.

Confirm what is being backed up. Important information may be stored on employee computers, servers, cloud platforms, accounting systems, websites, mobile devices, and specialist applications.

Do not assume every cloud service retains deleted or damaged information for as long as your business requires. Review the provider’s retention periods and recovery features. If those options do not meet your needs, include a separate backup service in the budget.

Backups also need to be tested. A successful backup notification shows that a task ran. A restore test confirms that the data can be recovered and used.

The UK National Cyber Security Centre recommends regularly backing up essential information and testing that it can be restored.

Allow for storage growth. If your business creates more files, emails, recordings, images, or customer records each year, backup costs may increase as well.

Budget for Internet and Network Equipment

Include your internet service, routers, firewalls, switches, wireless access points, cabling, and any support or security subscriptions attached to that equipment.

If losing internet access would stop the business from working, consider the cost of a backup connection. Compare that cost with the revenue, wages, and customer service time that could be lost during an outage.

Ask whether the backup connection uses a different type of service or supplier. Two connections may still depend on the same local infrastructure, which means one fault could affect both.

Review whether your current connection can support expected hiring, cloud applications, video calls, backups, and customer Wi-Fi. A service that works for ten employees may not be suitable after the business grows.

Network equipment requires software updates and eventual replacement. Record the support status of routers, firewalls, switches, and wireless access points. Equipment that no longer receives security updates should be scheduled for replacement.

Include installation and configuration costs. New equipment must be secured, connected to existing systems, documented, and tested before it is ready to use.

Include Phones and Communication Services

Phone and communication costs may be billed separately from other IT services, but they still belong in the technology budget.

Include business phone systems, mobile plans, phone numbers, call recording, voicemail, video conferencing, messaging, and contact-center services.

Check whether the service charges per user, phone number, call, recording, or storage amount. International calling, premium support, and additional features may create separate charges.

Include phones and headsets for new employees. If the business records calls, budget for the required storage, access controls, and retention settings.

Check when contracts end and whether equipment must be returned. Changing phone providers may also involve setup, number transfers, staff training, and temporary overlap between the old and new services.

Include Website, Domain, and Online Service Costs

These can include domain registration, website hosting, security certificates, website maintenance, software updates, plugins, backups, online forms, analytics, and email delivery services.

Confirm who owns the domain and website accounts. They should be registered to the business rather than an employee, contractor, or web developer.

Record domain renewal dates and enable appropriate renewal notifications. Losing control of a business domain can interrupt the website, email, and other services connected to it.

If the website accepts payments, bookings, or customer information, include the cost of maintaining its security and testing that it works.

Budget for Staff Training

Employees need training on the systems they use and the security risks they may encounter.

The budget may include cybersecurity awareness training, phishing simulations, training for new software, and instructions for employees who handle sensitive information or approve payments.

Training should also cover what employees must do when they receive a suspicious request, lose a device, send information to the wrong person, or notice unusual activity.

The Australian Cyber Security Centre’s Small Business Cyber Security Guide includes employee training and awareness as part of protecting a business from email attacks.

Include the time employees need to complete training. Even when the training platform is inexpensive, staff still need time during the working day to use it.

New systems may require additional training. Include that cost in the project budget instead of assuming employees will learn the software without support.

Allow for Compliance, Contracts, and Cyber Insurance

Your industry, location, customer contracts, or insurance policy may require specific technology and security controls.

Costs may include security assessments, audits, policy reviews, vulnerability testing, data-retention changes, access reviews, incident-response exercises, or independent certifications.

A customer may ask your business to complete a security questionnaire before signing or renewing a contract. Answering it may reveal controls that need to be introduced.

Cyber insurance applications may also ask about multifactor authentication, backups, endpoint protection, email security, employee training, and incident-response planning.

Review upcoming renewals and audits before approving the budget. This gives the business time to obtain quotes and complete required work.

Legal and compliance requirements differ between countries and industries. Confirm your obligations with the appropriate legal, compliance, insurance, and IT advisers.

Plan for Technology Projects

Keep planned projects separate from normal operating costs.

Projects may include moving offices, opening another location, replacing a server, changing phone systems, improving Wi-Fi, moving data to a new cloud service, or introducing a new business application.

Estimate the complete project cost. Include planning, licenses, equipment, implementation, data transfer, testing, training, temporary services, and support after launch.

Some projects require two systems to run at the same time while information is moved and employees are trained. Include that overlap in the budget.

Ask department managers what changes they expect during the year. A new service introduced by one department may require additional security, storage, integration, backup, and support work.

Business.gov.au recommends including both upfront and ongoing costs when preparing a digital budget. Check what the project will cost after the initial work is complete.

Review Supplier Contracts and Renewal Dates

Record the contract owner, renewal date, notice period, billing method, and cancellation process for each major supplier.

Some services renew automatically. Others require advance notice if you want to reduce licenses or cancel the agreement.

Check whether prices can change during the contract and whether the agreement includes minimum quantities. If the business expects to reduce staff or stop using a system, make sure the contract allows the licenses to be reduced.

Confirm how data can be exported and what happens when the service ends. A cheaper replacement may still involve migration, setup, training, and temporary overlap costs.

Do not leave important technology accounts tied to one employee’s personal email address or payment card. The business should retain access if that person leaves.

Keep a Reserve for Unplanned Costs

A laptop may be damaged, a firewall may fail, an employee may need urgent replacement equipment, or a technical problem may require work outside the support agreement.

There is no reserve percentage that suits every business. Base the amount on realistic costs, such as replacing an essential computer, obtaining emergency support, or restoring an important service.

Review unplanned IT spending from previous years. Use those figures when deciding how much to set aside.

The reserve should be separate from planned replacements. A computer already scheduled for replacement is not an unexpected cost.

Separate Recurring Costs From One-Time Costs

Recurring costs include software subscriptions, support agreements, internet services, phone systems, backup services, security tools, and equipment leases.

One-time costs include new equipment, migrations, office moves, installation work, and major upgrades.

Record annual subscriptions separately from monthly ones so that the business knows when larger payments are due.

You may also need to separate operating expenses from capital purchases for accounting and tax purposes. The rules vary by location, so confirm the correct treatment with your accountant.

How to Build Your Small Business IT Budget

1. Create an inventory of your hardware, software, services, suppliers, and contracts.

2. Record current monthly and annual costs, renewal dates, and notice periods.
3. Identify equipment that needs to be replaced during the budget period.
4. Estimate hiring, departures, new locations, and other business changes.
5. Add support, cybersecurity, backup, training, compliance, and recovery costs.
6. Create separate budgets for planned technology projects.
7. Add a reserve based on realistic emergency support and replacement costs.
8. Review the completed budget with your IT provider and accountant.

Record who approved each item and who is responsible for managing it. Review actual spending during the year instead of waiting until the next annual budget.

Review the Budget During the Year

Check the budget at least every quarter.

Compare actual invoices with the amounts expected. Look for new subscriptions, unused licenses, supplier price changes, additional storage charges, and projects that cost more or less than planned.

Update the forecast when the business hires employees, changes locations, introduces new services, or signs a contract with new security requirements.

A quarterly review also gives you time to plan for upcoming annual renewals. It is easier to compare providers or change services when the renewal deadline is still several months away.

Frequently Asked Questions

How much should a small business spend on IT?

There is no reliable percentage for every small business. Calculate the cost of the equipment, services, security, support, and projects your business needs. Industry benchmarks can provide context, but they should not replace a budget based on your operations and risks.

Should cybersecurity have a separate budget?

Cybersecurity costs should be clearly identified, even when some are included in software licenses or an IT support agreement. This makes it easier to see which protections are funded and which improvements still require approval.

How often should the IT budget be reviewed?

Review it at least annually when preparing the budget and quarterly during the year. Update it after significant hiring, office moves, new systems, supplier changes, or new compliance requirements.

Should equipment purchases and monthly services be combined?

Include both in the overall IT budget, but record them separately. This makes recurring operating costs easier to distinguish from one-time purchases and projects.

What costs are commonly left out of an IT budget?

Setup work, employee onboarding and offboarding, backup testing, staff training, security reviews, equipment disposal, project work, subscription increases, and urgent replacements are commonly overlooked.

Who should prepare the IT budget?

The business owner or finance team should work with the person responsible for IT. Department managers should also provide information about hiring, new software, planned projects, and changes to business operations.

Sources and Further Reading

• NIST Cybersecurity Framework 2.0 for Small Business
• NIST Cybersecurity Framework 2.0 Small Business Quick Start Guide
• Small Organisations Guide to Cyber Security: UK National Cyber Security Centre
• Small Business Response and Recovery Guide: UK National Cyber Security Centre
• Small Business Cyber Security Guide: Australian Cyber Security Centre
• Develop Your Digital Strategy: Business.gov.au

Ask your IT provider to review the budget before you approve it. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Offering Wi-Fi to customers, contractors, and visitors is convenient. But their phones and laptops should not connect to the same network as your business computers, printers, security cameras, servers, and file storage.

Even when you trust the person, you do not control their device. You do not know whether it has current security updates, whether it contains malware, or who else has used it.

A properly configured guest network gives visitors internet access without allowing their devices to communicate with your business systems.

What Separate Guest Wi-Fi Means

When someone connects to your guest Wi-Fi, they should be able to browse the internet, use email, and access online services. They should not be able to connect to anything on your internal network.

That includes:

• Business computers and servers
• Network printers
• File storage and backup devices
• Security cameras
• Building access systems
• Router and network management pages
• Other devices using the guest network

The Australian Cyber Security Centre recommends separating an organization’s internal network from the guest Wi-Fi used by unmanaged devices.

Both networks can use the same internet connection. The settings that separate them are configured in your network equipment, such as the router, firewall, switches, or wireless access points.

Why One Shared Network Creates Unnecessary Risk

Connecting to the same network does not automatically give a visitor access to every business file. Your passwords, device security settings, and user permissions still apply.

However, a device on the same network may be able to find or contact systems that it does not need to use. This could include a printer, shared folder, storage device, camera, or poorly protected management page.

An infected device may also try to connect to other devices on the network. If the network is divided into separate sections, those connections can be blocked before they reach your business systems.

The UK’s National Cyber Security Centre explains that network segmentation restricts movement between systems. If one device is compromised, separating the network reduces the number of other systems it can contact.

Separating the networks reduces risk by blocking access that visitors and unmanaged devices do not need.

A Different Wi-Fi Name May Not Be Enough

Your business Wi-Fi and guest Wi-Fi may appear as two different names when someone opens the Wi-Fi menu on their phone. Those names are called SSIDs.

A second SSID does not confirm that the devices are properly separated. The settings behind it must place guest devices on a separate network and block access to internal systems.

Business networking equipment commonly uses a separate virtual network, known as a VLAN, for guest traffic. Firewall rules then prevent that traffic from reaching private network addresses. Some small-business routers handle this automatically when guest mode is enabled.

Cisco’s current guidance describes guest Wi-Fi as a separate SSID connected to its own VLAN, with guests limited to internet access. Its small-office reference design also uses firewall rules to deny guest access to local networks.

The exact settings depend on your equipment. Look for terms such as:

• Guest network
• Network isolation
• Deny local network access
• Client isolation
• VLAN
• Guest firewall rules

If you only see a second Wi-Fi name and password, ask your IT provider to confirm what guest devices can reach.

Should Guest Devices Be Able to Connect to Each Other?

Guest devices should usually be blocked from communicating with one another.

This setting may be called client isolation, wireless isolation, peer-to-peer blocking, or Layer 2 isolation.

Without it, one visitor’s laptop may be able to contact another visitor’s device on the same guest network. Blocking those connections provides additional protection for everyone using the Wi-Fi.

Client isolation and business-network separation are two different controls. Client isolation blocks communication between guests. Network separation blocks communication between guests and your internal systems. A business guest network should normally use both.

Where Should Employee Phones and Personal Laptops Connect?

A personal phone that only needs internet access can usually use the guest network. The same applies to a personal laptop that does not need to connect to internal business systems.

If employees use personal devices to access company files, applications, or internal systems, the business needs a clear bring-your-own-device policy. Those devices may require security software, device management, encryption, and specific access rules.

An employee-owned device should not receive unrestricted network access unless the work requires it.

Company-owned and managed devices can use the business network if they need access to internal resources. Personal and unmanaged devices should use a restricted network unless there is a business reason to provide additional access.

What About Smart TVs, Cameras, and Other Connected Devices?

Smart TVs, speakers, cameras, thermostats, digital displays, and similar products often need internet access but do not need to communicate with your computers.

These devices can be placed on a separate network for connected devices. Some smaller businesses use the guest network for this purpose, although that may not work if the devices need to communicate with a controller, phone, or local recording system.

The right setup depends on how the devices work. A smart TV or security camera should not be able to reach business computers just because it uses the same router.

CISA’s network-segmentation guidance notes that separate networks can be used for guests, connected devices, personal computers, and work computers.

How to Check Your Guest Wi-Fi

Use these five checks to confirm that the network is set up correctly:

1. Check which devices use each network. Business computers and other managed equipment should use the business network. Visitors and unmanaged devices should use the guest network.
2. Confirm that local network access is blocked. Guest devices should not be able to connect to printers, file storage, cameras, servers, or network management pages.
3. Check whether guest devices are isolated from each other. Enable client isolation or the equivalent setting if your equipment supports it.
4. Review the Wi-Fi security settings. The Australian Cyber Security Centre recommends WPA3, WPA3 transition mode when compatibility is required, or WPA2 when WPA3 is unavailable. Use a guest password that is different from your business Wi-Fi password.
5. Check the router and access points. Install current firmware, enable automatic updates when supported, replace default administrator credentials, and replace equipment that no longer receives security updates.

Test the guest network again whenever the router, firewall, switches, or wireless access points are replaced or reconfigured.

Do You Need a Separate Internet Connection?

Most small businesses do not need to pay for a second internet connection just for visitors.

A suitable business router or firewall can use one internet connection while keeping the internal and guest networks separate. The guest network can also have its own speed limit so that visitor traffic does not use all the available bandwidth.

Very small or older routers may not support proper isolation. Some provide a guest Wi-Fi option but offer limited control over what guests can access. Check the manufacturer’s documentation or ask your IT provider to test the configuration.

Keep the Guest Password Separate

Do not use the same password for your guest and business Wi-Fi networks.

Sharing the business password with visitors makes it harder to control who can reconnect later. It also means changing the password on every company device if the password needs to be replaced.

A separate guest password can be changed without disconnecting business equipment. Change it when too many people know it, after a large event, or when a contractor no longer needs access.

The password protects access to the guest network. It does not replace network separation.

Frequently Asked Questions

Is a guest Wi-Fi password enough to protect my business network?

No. The password controls who can connect to the guest Wi-Fi. Your equipment must also block guest devices from reaching the internal business network.

Can guests use the same internet connection as employees?

Yes. The networks can share one internet connection while remaining separated inside the router, firewall, and wireless equipment.

Should employees connect their personal phones to guest Wi-Fi?

If the phones only need internet access, the guest network is usually the safer option. Devices that need access to company systems should follow your business’s device and access policies.

Can visitors use a network printer?

Guest access to printers should normally be blocked. If visitor printing is necessary, your IT provider can set up a controlled method without giving guests access to the rest of the business network.

Does guest Wi-Fi prevent cyberattacks?

No. It reduces unnecessary access and can limit how far a compromised device can reach. Your business still needs secure passwords, multifactor authentication, software updates, endpoint protection, backups, and appropriate access controls.

Sources and Further Reading

• Secure Your Wi-Fi and Router: Australian Cyber Security Centre
• Risk Management of Enterprise Mobility: Australian Cyber Security Centre
• How to Implement Zero Trust Network Access: UK National Cyber Security Centre
• Cisco Unified Branch Design Guide
• Cisco Meraki Small Office Reference Architecture
• Federal Mobile Workplace Security Guidance: CISA

Ask your IT provider to confirm that your guest Wi-Fi is properly separated from your business network. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

A cloud service may hold years of customer records, documents, emails, invoices, project history, or staff activity.

If you cancel before moving that information, employees may lose access before the business has a usable copy. Some providers give administrators more time to retrieve data. Others restrict access or begin deleting information after cancellation.

The rules depend on the service, subscription, contract, and how the account was purchased. Check the provider’s current terms before setting a cancellation date.

What can happen after you cancel

Canceling a subscription may stop employees from signing in, make applications read-only, or leave data available only to administrators. Some services begin a retention period before deletion, while others remove data sooner.

Billing may also continue until the end of an annual or fixed-term contract. Canceling through a reseller may follow a different process from canceling a subscription purchased directly from the software company.

Microsoft 365 business subscriptions pass through several lifecycle stages after they end. Access and timing depend on how the subscription was purchased. Microsoft advises customers to back up their information before it is deleted. Microsoft 365 subscription guidance

Google also tells Workspace customers to export the information they want to keep before canceling. Its guidance states that third-party application data is not automatically deleted when a Workspace subscription is canceled. Google Workspace cancellation guidance

Check the rules for the service you are canceling instead of relying on a general retention period.

Check the provider’s cancellation rules

Read the provider’s current documentation and your contract before you cancel.

Confirm when employee access will stop and whether administrators will still be able to retrieve data. Check how long the information will remain available, what the export includes, and whether the export must be requested before cancellation.

You should also confirm whether the account can be reactivated, when billing stops, and what steps are required to delete the account. Ask whether the provider will confirm the deletion in writing.

Contact the provider if its published documentation does not answer these questions. Keep a copy of the response with your cancellation records.

If the service was purchased through a reseller or IT provider, ask them to confirm the process and the final date of access.

Export all the information your business needs

Start by identifying what the service contains. Depending on the application, this could include customer details, documents, attachments, emails, calendar entries, invoices, support tickets, project history, reports, or audit records.

Do not assume the standard export includes everything. Some services export the main records but leave out attachments, comments, user permissions, deleted items, application settings, automation rules, or activity history.

Read the provider’s export documentation so you know what will be included. Contact the provider if important information is missing from the standard export.

Use a business-owned administrator account to request and download the files. Store them somewhere controlled by the business rather than leaving the only copy in an employee’s personal downloads folder.

Large exports may take time to prepare. Start early enough to investigate missing files or failed downloads before access ends.

Test the files before canceling

Open a sample of every file type you exported. Check that attachments are present, dates are correct, and text can be read. Look for broken links, incomplete records, or files with no clear connection to the customer or project they belong to.

If you are moving to another service, test the import before canceling the old one. Check names, contact details, dates, notes, attachments, custom fields, open tasks, historical transactions, and user permissions.

A CSV file may contain the words and numbers while leaving out the relationships between records. For example, customers and invoices might appear in separate files without preserving the links between them.

Import a small set first. Ask employees who use the system to check the result before the remaining information is moved.

Check connected applications and sign-ins

Cloud services often exchange information with other systems. A website form may send enquiries into the service you are canceling. Your accounting software may import invoices from it. Reports, email campaigns, payment notifications, and scheduled tasks may also rely on that connection.

List the systems that send information into the service and those that receive information from it. Include mobile apps, browser extensions, automated workflows, API connections, file storage, calendars, and reporting tools.

Move or disable each connection before the account closes. Test the replacement process to confirm that new records arrive in the correct place and scheduled tasks still run.

Employees may also use the service to sign into other applications. This happens when they choose options such as “Sign in with Google” or “Sign in with Microsoft.”

Add another sign-in method before canceling the original service. Confirm that the business controls the administrator and recovery details for every connected account.

After the move is complete, revoke old access tokens, API keys, and application connections.

Keep the records your business is required to retain

Your business may need to keep financial records, contracts, customer communications, consent records, project files, or employee information for a set period.

The requirements depend on the type of information, your industry, your contracts, and the countries where you operate. Speak with your accountant, legal adviser, or compliance specialist before deleting records that may need to be retained.

Document what was exported, when it was downloaded, who checked it, and where it is stored. Keep the cancellation confirmation, final invoice, and any written response from the provider about deletion.

Set a retention period for the exported files. Delete them securely when the business no longer needs them.

Ask how the provider will delete your data

Canceling a subscription and deleting an account may be separate actions.

Ask what will happen to active customer data, deleted records, backups, audit logs, account information, billing records, and support tickets. Confirm whether any subcontractors also store or process your information.

A provider may remove information from its active systems before the same information ages out of protected backups. Those backup copies may remain until the provider’s normal backup retention period ends.

The provider may also need to retain some information for billing, fraud prevention, security, or legal reasons. Ask what will remain, why it will remain, and when it will be deleted.

The NCSC recommends making sure supplier contracts state how information and assets will be returned or deleted when a contract ends or moves to another supplier. NCSC supply chain guidance

For important systems, request written confirmation when the account and customer data have been deleted.

How to cancel a cloud service without losing your data

1. Choose an owner and set the dates

Give one person responsibility for the move. Review the contract and allow enough time for exporting, testing, training, and fixing any failed connections.

2. Record what uses the service

List the information stored in the service, the employees who use it, and every application connected to it. Check whether employees use the account to sign into other services.

3. Export and store the data

Use the provider’s administrator export tools. Save the files in a business-controlled location and protect them according to the type of information they contain.

4. Test the export and the replacement

Open the files and check the information. Import a small set into the replacement service and ask employees to confirm that the records are correct.

5. Move connected services and employees

Update forms, automated processes, reports, sign-in methods, and integrations. Give employees access to the replacement and test the work they perform every day.

6. Cancel the subscription

Cancel after the data and business processes have been checked. Save the confirmation, final invoice, and provider correspondence.

7. Remove old access and confirm deletion

Revoke old integrations and remove unneeded user accounts. Ask the provider to confirm what will be deleted, what it must retain, and when the deletion will be completed.

Frequently asked questions

How long will a cloud provider keep our data after cancellation?

There is no standard period. It may depend on the provider, service, plan, contract, purchase method, and reason the account ended.

Check the current documentation and obtain written confirmation for important systems.

Is a data export the same as a backup?

An export can provide a retained copy when it contains the information you need, can be opened, and is stored securely.

Some exports leave out settings, permissions, relationships, audit records, or unsupported file types. Test the files before relying on them.

Can we reactivate the service later?

Some providers offer a reactivation period. Others do not guarantee recovery after cancellation or deletion.

Export and test your information before canceling.

What if the provider closes the service?

Keep current exports of important information while the service is active. You may have little time to move if a provider closes, sells the product, or ends the service.

Will cancellation stop billing immediately?

That depends on the contract. Monthly plans, annual commitments, reseller agreements, and fixed-term subscriptions may use different billing rules.

Confirm the final payment and service date before approving the cancellation.

Sources and further reading

• NCSC: Supply chain security guidance
• NCSC: Supplier assurance questions
• Microsoft Learn: What happens when a Microsoft 365 business subscription ends
• Microsoft Learn: Data retention, deletion, and destruction in Microsoft 365
• Google Workspace Admin Help: Cancel Google Workspace
• Google Workspace Admin Help: Export your organization’s data

Before canceling a cloud service, ask your IT provider to check the export, connected applications, and employee sign-ins.

And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Employees often use personal devices for work before the business has made a decision about it. They add work email to a phone, download a file to a home laptop, or sign into a company app from a computer shared with family.

Once business data is stored on a personal device, you have less control over updates, installed apps, backups, and who else uses the device. You also need a way to remove company data when the employee leaves or the device is lost.

Personal devices can be allowed, but the business should decide which devices, applications, and types of work are permitted.

What BYOD includes

Bring your own device, usually shortened to BYOD, means an employee uses a personally owned phone, tablet, or computer for work.

That can include:

• Adding work email to a personal phone
• Signing into Microsoft 365 or Google Workspace
• Joining online meetings
• Opening customer or company files
• Using a business messaging app
• Accessing accounting, CRM, or project management software
• Downloading documents to a personal computer

Depending on the application, business information may remain in the cloud or be downloaded to the device as messages, attachments, cached data, or files.

What you cannot fully control on a personal device

Your IT team can set and monitor security on company-owned devices. With personal devices, employees choose which apps to install, when to update the operating system, who else uses the device, and where files are backed up.

Management software can enforce some rules, but the available controls depend on the device, operating system, application, and enrollment method.

Other people may use the device

An employee may share a home computer or tablet with a partner, child, or another family member. Separate user accounts can reduce the risk, but many personal devices are used through one shared account.

The UK National Cyber Security Centre says BYOD access should not be permitted when an employee cannot follow the required security rules. Its example includes a device that cannot keep the employee’s work separate from other family users. NCSC BYOD guidance

Updates may be missing

Your IT provider may not be able to confirm whether a personal device runs a supported operating system or has current security updates.

An employee may delay an update because the device lacks storage, an older application might stop working, or the device is rarely restarted.

Business files may enter personal storage

A file downloaded from work email or cloud storage may remain in the Downloads folder, a personal document folder, or a device backup.

A personal cloud backup service could then copy the file to an account the business does not manage. Opening the document in a personal application may create another unmanaged copy.

Other applications may access business information

Personal devices contain applications chosen by the employee. Some may have permission to read files, contacts, browser activity, or information copied to the clipboard.

The business may not know which applications are installed or what those applications can access.

Repairs can expose business data

A broken personal phone or laptop may be taken to a repair shop chosen by the employee. Business email, saved sessions, or downloaded files could still be available on the device.

Your policy should tell employees who to contact before a device is repaired and what to do if the device cannot be opened.

Company data may remain after employment ends

Disabling an employee’s account stops future access to many cloud services. It does not remove copies that were downloaded to personal folders, opened in unmanaged applications, or copied to personal storage.

Managed work profiles and protected applications make it easier to remove company data. They can only remove the information they control.

Decide what work is allowed

Set access based on the work being performed and the information involved.

You might allow employees to read work email through an approved mobile app while requiring a company computer for customer database exports. Staff handling financial records, health information, legal documents, or large amounts of customer data may also need company-owned devices.

Administrative work should be performed from a managed device. Anyone responsible for user accounts, security settings, backups, or business systems should not do that work from an unmanaged personal computer.

Apply the same rules to contractors. Their access should be limited to the applications and information required for their work.

Security requirements for personal devices

A personal device should meet your requirements before it can access company information.

Use a supported operating system

The device should run an operating system that still receives security updates. Block access from devices that can no longer install current updates.

Install security updates

Operating system and application updates should install automatically where possible. Employees should restart their devices when an update requires it.

Require a screen lock

Require a PIN, password, fingerprint, or facial recognition to unlock the device. Configure the screen to lock automatically when the device is not being used.

Require device encryption

Encryption helps protect stored information if a device is lost or stolen. The Australian Cyber Security Centre recommends full-device encryption when personal devices may store business information. Cyber.gov.au BYOD guidance

Encryption must be enabled before the device is lost. It also needs to be supported by a strong device password or PIN.

Require MFA

Require MFA for work email, cloud storage, and other important systems. The NCSC recommends MFA as a minimum for BYOD access.

Use MFA for account sign-ins. Protect downloaded information with encryption and managed applications.

Block rooted or jailbroken devices

Rooting or jailbreaking removes some of the operating system’s built-in restrictions. These devices should not be allowed to access company data.

Detection is not perfect, so it should be used with the other security controls in this article.

Approve the applications used for work

Tell employees which applications they may use for email, messaging, file access, and other work.

Where your management service supports it, prevent business information from being saved to personal storage or copied into unmanaged applications.

Use separate accounts on shared computers

A personal computer used for work should have a separate account for the employee. Other users should have their own accounts and should not know the employee’s password.

Do not allow BYOD access when work cannot be kept separate from other users of the device.

Tell employees how to report problems

Employees need to know who to contact if a device is lost, stolen, repaired, replaced, or infected with malware.

Early reporting gives the business more time to disable access, check account activity, and remove managed data.

Control business data with managed apps or work profiles

Device and application management services can help keep work information separate from personal information.

Mobile device management, or MDM, can apply settings to an enrolled device and report whether it meets company requirements. The amount of control depends on the platform and enrollment method.

Mobile application management, or MAM, applies controls to supported work applications and their data. Depending on the product, it may restrict copying, block saving to personal storage, require another PIN, or remove company information from managed apps.

For example, Microsoft Intune can remove company data from protected applications when a device is lost or an employee leaves. Personal information can remain on the device.

Selective removal only affects data managed by the service. It cannot delete a file copied into an unmanaged application, personal backup, or unsupported storage location.

A factory reset removes personal and business data. Microsoft warns administrators about the risk of applying full device management to computers and phones the business does not own. Configure selective removal where possible and tell employees exactly what your management service can see and do. Microsoft Intune planning guide

What your BYOD policy should cover

Your policy should answer these questions:

• Which employees and contractors may use personal devices?
• Which types of devices are permitted?
• What work can be performed on them?
• Which applications must be used?
• Can company files be downloaded?
• Can the device be shared with other people?
• Which security settings are required?
• What information can the business or IT provider see?
• What settings can the business control?
• Can company information be removed remotely?
• What happens if the device is lost or stolen?
• What must happen before the device is repaired or sold?
• What happens when the employee leaves?
• Who pays for mobile data, repairs, or replacement?

Privacy, employment, and data protection requirements vary between countries. Have the policy reviewed for each location where you employ people.

Employees should read and accept the policy before company access is added to their devices.

What to do when a personal device is lost or stolen

The employee should contact the business or IT provider as soon as possible.

Your response may include:

1. Disabling access if the device cannot be accounted for
2. Revoking active sign-in sessions
3. Removing company data from managed applications
4. Removing the device from approved-device lists
5. Checking account activity for unexpected sign-ins
6. Resetting credentials if they may have been exposed
7. Recording which company files may have been stored on the device

Remote locking and removal commands only work after the device connects to the management service. A device that remains switched off or offline may never receive the command.

Encryption and account controls are still required because remote removal might not run.

What to do when an employee leaves

Disable the employee’s account and revoke active sessions at the agreed time. Remove company data from managed applications or work profiles.

Check whether business files were downloaded to the device and confirm how those copies will be returned or deleted.

Remove the device from your approved-device records. Where your management service supports it, remove business applications, certificates, email profiles, and VPN settings.

When personal devices should not be allowed

Provide a company-owned device when:

• The employee handles sensitive information
• The role requires administrator access
• Large amounts of company data must be stored locally
• The device is shared with other people
• The operating system is no longer supported
• Encryption cannot be enabled
• The business cannot separate or remove its data
• The employee does not accept the required security controls
• The device has been rooted or jailbroken

Company-owned devices are easier for your IT provider to support because their settings and installed software are known.

Frequently asked questions

Can employees use a web browser without enrolling their personal device?

You can allow browser access, but information may still remain in the browser cache, Downloads folder, saved passwords, screenshots, or active sessions.

Access policies can limit the devices and browsers that are permitted. Sensitive work may still require a managed device.

Is MFA enough to secure a personal device?

MFA helps protect the employee’s account. Device encryption protects stored files, while managed applications control how company information is used and copied.

You still need updates, screen locks, approved applications, and a process for lost devices.

Can the business see an employee’s personal information?

It depends on the management method. App management focuses on business applications and their data. Device enrollment can show device details and allow broader control.

Give employees a written explanation of what your IT team can see, change, lock, or remove before they enroll.

Can the business erase a personal phone?

Some enrollment methods support a full factory reset, while app-only management does not. A factory reset deletes personal information as well as company data.

Use selective removal for employee-owned devices where it is available.

Is BYOD cheaper than providing company devices?

BYOD may reduce hardware purchases, but it can add costs for management, support, security, and administration. Whether it saves money depends on the devices, applications, and work you allow.

Sources and further reading

• NCSC: Bring your own device guidance
• NCSC: BYOD costs and security requirements
• Australian Cyber Security Centre: Risk management of enterprise mobility and BYOD
• Australian Cyber Security Centre: Securing customer personal data
• Microsoft Learn: Protect data and devices with Intune
• Microsoft Learn: Remove company data from protected applications
• Microsoft Learn: Intune planning guide

If employees already use personal devices for work, ask your IT provider to check what they can access and whether the required controls are in place.

And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Administrator access often starts with one request. An employee needs to install a printer, update a specialist program, or change a setting on their computer.

Giving them administrator access gets the job done. The problem is that the access usually stays after the request has been completed.

From then on, the employee can approve other software installations and make changes that would normally require help from IT. If they install the wrong program or someone takes control of their account, those permissions can also be used to change the computer.

For everyday work, employees should use standard accounts. Administrator access should be kept for tasks that require it.

What administrator access allows someone to do

An administrator has more control over a computer than a standard user.

On Windows, members of the local Administrators group have full control over the resources on that computer. According to Microsoft’s guidance on local accounts, Microsoft recommends limiting the number of users in that group.

Depending on the computer and how it is managed, an administrator may be able to:

• Install and remove software
• Add drivers for printers and other equipment
• Create, change, or remove user accounts
• Change system settings
• Change permissions on files and folders
• Install services that continue running in the background
• Make changes to some security settings

Mac computers also have standard and administrator accounts. Apple says administrators can install and remove software, manage other users, and change settings. Apple recommends limiting the number of administrative users and using a standard account when administrator rights aren’t required.

Local administrator access applies to the computer itself. It is different from Microsoft 365, Google Workspace, network, or server administrator access. Those accounts may control email, cloud files, user accounts, or several systems at once.

An employee may have local administrator access to a laptop without being a Microsoft 365 administrator. Both types of access should be reviewed separately.

Why permanent administrator access increases your risk

Software launched by an employee normally starts with the permissions available to that employee.

If the software asks for administrator approval and the employee approves it, the program may be able to install system components, change settings, or affect information belonging to other users.

That matters when someone downloads a fake installer, opens a harmful attachment, or installs software from an untrusted website. The employee may think they are approving a legitimate update while giving the program permission to change the computer.

Windows uses User Account Control to ask for approval before many administrative changes. An employee signed in with an administrator account can approve the request themselves. A standard user is normally asked for credentials belonging to an administrator.

Microsoft describes the standard account as the recommended and more secure way to use Windows.

Standard accounts also reduce the number of people who can change security settings without review. Employees cannot approve every installation themselves, so IT has a chance to check the program, where it came from, and what permissions it needs.

CISA advises businesses to control local administrator access and restrict who can install software. The Australian Cyber Security Centre includes restricting administrative privileges in its Essential Eight security measures and recommends creating separate accounts for administrative work. Cyber.gov.au

Standard accounts are suitable for everyday work

A standard account can still be used for normal business tasks, including:

• Reading and sending email
• Using a web browser
• Working in Microsoft 365 or Google Workspace
• Accessing approved business applications
• Joining online meetings
• Printing with an installed printer
• Opening and saving files
• Changing personal settings that do not affect other users

Some applications can be installed for one user without administrator access. Others need administrator approval because they add drivers, services, or files in protected parts of the computer.

An employee should not receive permanent administrator access because one program needs an update. IT can approve the installation, deploy the update remotely, or use a separate administrator account for that task.

Older business applications sometimes expect the user to have administrator rights. Test those applications before changing account permissions. In many cases, IT can update the application, adjust its configuration, or grant access to the specific folders it needs.

How to manage software installations without permanent administrator access

Staff can still get software installed and updated without keeping administrator rights.

Let IT install approved software

Your IT team or provider can install the program remotely. This also gives them a chance to confirm that the installer came from the software company and that the requested version is supported.

Use managed software deployment

Businesses with managed computers can send approved applications and updates to employees without asking each person to run an installer. The available method will depend on the operating system and device management service.

Approve individual requests

An employee can contact IT when an installation requires administrator approval. IT can review the request and enter the required credentials without giving the password to the employee.

Provide time-limited administrator access

Some roles need to install or test software as part of their work. Give those employees a separate administrator account that is enabled only for the approved task, then disable it afterward.

Create a separate administrator account

Employees who regularly perform approved technical work can have a separate administrator account. They should continue using their standard account for email, browsing, and normal work.

The administrator account should only be used when a task requires the extra permissions.

Who should have administrator access?

Administrator access should be limited to people whose work requires it.

That may include:

• Your internal IT staff
• Your IT provider
• An approved technical employee
• A software specialist responsible for a particular system

Business owners should use standard accounts for their normal work too. Ownership of the company does not require permanent administrator access to every computer.

Your IT provider should keep a managed administrator account so they can support each device. The password should be protected and should not be shared with employees.

Using the same local administrator password on every computer creates another problem. If that password is stolen from one device, it may work on the others. Each computer should have a unique administrator password or use a management service that controls those passwords.

How to remove administrator access safely

Do not remove every administrator account at once. Someone still needs a working way to manage and repair each computer.

1. Check which employees have administrator access

Review the local Administrators group on every Windows computer and the administrator users on every Mac. Include old accounts, shared accounts, vendor accounts, and accounts created during the original setup.

2. Confirm why each person has it

Ask what tasks require administrator access. A clear business need should exist for every account that keeps the permission.

Needing to update one application occasionally does not require permanent access.

3. Make sure IT has a working administrator account

Confirm that your IT team or provider can sign in with a protected administrator account before removing permissions from employees.

Test the account on each device. This prevents the business from being locked out of its own computers.

4. Test important software

Check the programs each employee needs for their job. Confirm that they open, update, and work correctly when the employee uses a standard account.

Any application that fails should be reviewed before administrator access is removed permanently.

5. Change the employee’s account to a standard account

Once the computer has been checked, remove the employee from the local administrator group or change the account type.

The employee should then sign out and sign back in so the new permissions apply correctly.

6. Tell staff how to request an installation

Give employees one place to contact when they need software installed or a setting changed. Explain what information to include, such as the program name, the reason it is needed, and the official download page.

7. Review access when roles change

Check administrator access when an employee changes jobs, receives new responsibilities, or leaves the business. Include it in your regular access reviews as well.

Frequently asked questions

Can a standard user install software?

It depends on the software. Programs that only install inside the employee’s user profile may not need administrator approval. Software that changes protected system files, installs drivers, or adds background services usually requires administrator credentials.

Will removing administrator access stop employees from working?

Normal business applications should continue working. Test specialist and older applications before making the change across every computer.

Does removing administrator access stop malware?

It reduces what many harmful programs can change, but it does not prevent every attack. You still need supported software, security updates, endpoint protection, email security, MFA, and tested backups.

Should the business owner keep administrator access?

Use a standard account for everyday work. If you need administrator access for an approved task, use a separate account and keep its password protected.

Is local administrator access the same as Microsoft 365 administrator access?

No. Local administrator access controls one computer. Microsoft 365 administrator roles can control cloud users, email, files, security settings, and other parts of the company’s Microsoft environment.

Both should be limited and reviewed.

Sources and further reading

• Microsoft Learn: Local accounts
• Microsoft Learn: How User Account Control works
• Apple Support: Set up your Mac to be secure
• CISA: StopRansomware Guide
• Australian Cyber Security Centre: Restricting administrative privileges

If you are not sure who has administrator access or whether your employees need it, ask your IT provider to review the accounts on your business computers.

And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it out.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Most owners only look at their IT when something has already gone wrong. A file won’t open, a laptop won’t start, or an invoice gets paid into a scammer’s account. Fixing it at that point costs more than preventing it would have.

Almost none of it happens without warning. The backup that fails when you finally need it had been failing for weeks. The account a scammer used belonged to someone who left last year. Thirty minutes a month is usually enough to catch that kind of thing.

Why a monthly look is worth the time

Verizon’s 2026 Data Breach Investigations Report found that 31% of breaches started with attackers exploiting software that hadn’t been patched. That makes unpatched software the most common way in, ahead of stolen passwords. The same report found the median time to fully fix a known problem has risen to 43 days.

Most attacks use a problem that was already known, with a fix already available. Nobody had installed it yet.

The check

1. Updates

Check whether Windows updates are installing on your computers, or sitting at “restart required” week after week. Do the same for phones and for the software you use most, like your browser and your accounting app. If people keep clicking “remind me later,” that’s something to fix.

2. Backups

Open your backup tool and look at the last few runs. You want recent successful backups, not a list of errors. Then check when anyone last restored a file from it. If it’s never been tested, you don’t know whether it works.

3. Who has access

Pull up the list of user accounts in Microsoft 365 or Google Workspace and read through it. Every name should be someone who still works for you. Look for people who left, contractors who finished months ago, and shared logins like “office” or “admin” that several people use. Switch off anything you don’t need.

4. Multi-factor authentication

Check that MFA is switched on, and that it’s on for everyone, not just the people who set it up first. Pay closest attention to admin accounts and anyone who handles money. Microsoft’s research shows MFA blocks more than 99.2% of account compromise attacks.

5. Devices

Look at what’s connected to your systems. If there’s a laptop or phone you don’t recognize, find out whose it is. While you’re there, check that laptops are encrypted and that any phone with company email on it has a passcode or fingerprint lock.

6. Subscriptions and licenses

Open your billing page and read what you’re paying for. Businesses regularly pay for licenses belonging to people who left, or for two tools that do the same job. It’s also how you find software somebody signed up for without telling anyone.

Make it a routine

Put it in the calendar on a fixed day, like the first Monday of the month, and give it to the same person each time. That’s you or whoever handles the admin side.

Keep a running note of what you checked and what you found. After a few months you’ll see whether the same problem keeps coming back. If it does, it needs fixing properly instead of clearing each time.

Thirty minutes only works if you don’t stop to fix things along the way. Write down what you find and deal with it afterward.

Who fixes what

Most of it is small, like a laptop that needs restarting, a license to cancel, or an account to switch off. Handle those yourself.

Send the rest to your IT provider: backups that keep failing, MFA that won’t turn on for someone, a device nobody recognizes, or updates that fail on the same machine every month. Those usually mean there’s a bigger problem behind them.

What this check doesn’t do

It isn’t monitoring. A good IT provider has tools watching your systems all day and flagging things you’d never spot from a monthly glance.

The check covers what those tools can’t know. You know who left, which subscriptions you approved, and whose laptop is whose.

Frequently asked questions

How often should a small business check its IT?

Once a month is enough for this list. Backups are worth a quick look more often if losing a day’s work would seriously hurt, since that’s the item most likely to fail quietly.

Who should do it?

You or whoever runs the admin side of the business. Most of the list needs no technical skill, just someone who knows who works there and what the business pays for.

What if I don’t know where to find any of this?

Ask your IT provider to walk you through it once and write down where each thing lives. Many will also send you a monthly summary covering most of it.

Isn’t this my IT provider’s job?

They handle the monitoring, the patching, and the fixing. The check is the part that depends on knowing your business, like who left last month or which subscription nobody approved.

If I only have ten minutes, what matters most?

Backups and updates. Without working backups you can lose everything you’ve stored, and unpatched software is now the most common way attackers get in.

Does this apply if everything we use is in the cloud?

Yes. Cloud tools still need updated devices, working backups, MFA switched on, and access lists that match who actually works for you.

Sources and further reading

• Verizon 2026 Data Breach Investigations Report — the finding that 31% of breaches start with exploitation of unpatched software, and that the median time to fully fix a known problem is 43 days.
• Microsoft: Plan for mandatory Microsoft Entra multifactor authentication — Microsoft’s research that MFA blocks more than 99.2% of account compromise attacks.

If you’d like a hand setting this up, your IT provider can show you where each of these lives in your systems and take the fixing off your plate. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Most of your business probably runs in the cloud now. Email, files, accounting, bookings, payments, it’s all online. Then one day a service goes down, and nobody can send an email, open a file, or take a payment.

It doesn’t take a hacker for this to happen. In July 2024, a faulty software update from the security company CrowdStrike crashed millions of Windows computers around the world in a few hours. Microsoft estimated it hit 8.5 million devices, grounding flights and stopping work at banks and hospitals.

Outages happen, even to the big names

Microsoft 365 itself has had days where email or Teams stopped working for hours. Internet providers have bad days too, and when yours does, everything online goes with it. Any tool you depend on can go down.

So much of a small business runs on a handful of online services now, and if one goes down, the work that depends on it stops until it’s back. Being with a big, well-known provider doesn’t protect you from this.

What an outage does to a small business

When a key service goes down, your team can’t get to email or files, so work stops. If your payment or booking system is offline, you can’t take money or appointments. Customers try to reach you and can’t, and you can’t reach them either. Staff end up sitting around waiting.

You usually can’t fix it yourself. When a big provider has an outage, all you can do is wait for them to sort it out. The goal of a plan is to keep working, and keep customers informed, until they do.

What a simple plan covers

A good plan answers these questions:

• Which tools are critical? List the handful of services that would stop the business if they’re down, like email, your payment system, or your booking tool. Ignore the ones you could live without for a day, and focus on the few that would halt the work.
• How will people keep in touch? Have a backup way to reach staff and customers that doesn’t depend on the tool that’s down. That might be phone numbers, a group chat on a different app, or text messages.
• What do you need reachable offline? Keep a copy of the essentials, like your customer contact list, key phone numbers, and important documents, somewhere you can open if the main system is down. A printout or a copy on a phone is enough.
• Who’s in charge? Decide who makes the decisions during an outage and who keeps customers updated. When it’s clear in advance, people act instead of waiting to be told.
• Where do you check, and who do you call? Know where to see whether it’s a wider outage, which is usually the provider’s status page, and who to call for help, which is usually your IT provider.

What to do the moment an outage hits

1. Check whether it’s just you. Look at the provider’s status page, or ask whether anyone else is having the same problem. If it’s a wider outage, there’s nothing to fix on your end, so stop trying.
2. Tell your team. Let people know what’s down and what to use instead, so nobody wastes an hour rebooting a laptop that was never the problem.
3. Switch to your backup way to communicate. Move to the phone, text, or another app so the team can still coordinate.
4. Tell customers if it affects them. If you can’t take bookings or payments, say so and tell them when to try again.
5. Note when it started and what’s affected. A couple of lines is enough. It helps you follow up afterward and spot anything that needs fixing once things are back.

A few things that make outages hurt less

• Keep key files available offline. With OneDrive or SharePoint, recent files can sync to the device so you can still open them when the service is down. Ask your IT provider to make sure this is set up.
• Have a backup way to get online. A mobile hotspot from a phone can get a few key people working again if your main internet drops.
• Know your status pages. Bookmark the status page for Microsoft 365 and your other main tools. It’s the fastest way to tell whether the problem is them or you.
• Keep contacts off the cloud. Have your important phone numbers and contacts somewhere that doesn’t need the internet, like a printout or your phone’s own contact list.
• Ask your IT provider about alerts. Many can set up a warning that tells you about an outage before your customers do.

Keep your plan on one page

Keep this to a single page, somewhere you can reach without your main systems, whether that’s printed or in a separate app. Write down your critical tools, your backup way to communicate, where the essentials live, who’s in charge, and who to call. Review it once or twice a year so the names and numbers stay current.

Frequently asked questions

Isn’t the cloud always available?

No. Cloud services are reliable, but they still have outages, and even the biggest providers go down sometimes. The CrowdStrike outage in 2024 took millions of computers offline in a few hours. It’s safer to assume an outage will happen eventually and have a plan for it.

What should a continuity plan include?

The basics: which tools are critical, a backup way to reach staff and customers, where to find essential information if the main system is down, who’s in charge during an outage, and who to call for help. One page is enough for most small businesses.

What if the internet itself goes down, not just one app?

Plan for that too. A mobile hotspot from a phone can get key people back online, and a phone call still works when your systems don’t. Keep important numbers and contacts somewhere that doesn’t need the internet.

How can my team keep working if Microsoft 365 is down?

It depends on the work, but options include using files already saved on a synced device, switching to phone or text to stay in touch, and handling anything urgent on paper until service returns.

How long do outages usually last?

There’s no set answer. Some are fixed in minutes, others take most of a day. That’s the reason to plan around them, since you can’t count on a quick fix and you can’t speed it up from your end.

Whose job is this?

Yours, with help from your IT provider. They can tell you which of your tools are most at risk, set up things like synced files and a status-page alert, and help you write a simple plan.

Sources and further reading

• Microsoft: Helping our customers through the CrowdStrike outage — Microsoft’s estimate that 8.5 million Windows devices were affected.
• CISA: Widespread IT Outage Due to CrowdStrike Update — the US cyber agency’s alert on the incident.

If you’re not sure which of your tools would hurt most if they went down, or you’d like help putting a simple plan together, your IT provider can work through it with you. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

If your business runs on Microsoft 365, you’ve got two places to store files: OneDrive and SharePoint. Most people are never told the difference, so files end up wherever is easiest, spread across OneDrive, SharePoint, Teams, and the desktop.

That’s how you end up with the everyday headaches: a file nobody can find, a document only one person can open, and a scramble to recover someone’s work after they leave. The rule for where things should go is simple once you know what each one is for.

What each one is for

OneDrive is your own space. Think of it as the cloud version of the My Documents folder on your computer: your work files, private to you unless you choose to share them. It’s the right place for drafts and anything only you need.

SharePoint is the team’s space. It’s built for files with shared ownership, the documents your team, department, or the whole business works on together. Microsoft’s own advice is straightforward: if you’re working on something by yourself, save it to OneDrive; if you’re working as a team, save it where the team works.

Where Teams fits in

Microsoft Teams confuses this for a lot of people, because it looks like a third place to keep files. In reality, when you upload a file to a Teams channel, it’s stored in that team’s SharePoint site. The Files tab in Teams is just a view into SharePoint.

So if your team works in Teams, your shared files are already in SharePoint, whether you realized it or not. That’s a good thing. It means the files have shared ownership and don’t belong to one person’s account.

So where should your files live?

Here’s the rule that keeps things simple:

• If it’s your own draft or something only you need, keep it in OneDrive.
• If the team needs it, more than one person works on it, or it’s a client or project file, put it in SharePoint (or the Teams channel for that work, which is the same thing).
• Don’t leave important shared files sitting only on someone’s desktop or only in their personal OneDrive.

Sharing files the right way

Where a file lives also changes how you share it.

When you share a file from your OneDrive, you’re sending people into your personal space, usually with a link tied to your account. That works, but the link depends on you. If you leave, or the file moves, those links can stop working, and whoever relied on them is stuck.

In SharePoint or a Teams channel, the right people already have access, because the files belong to the team rather than to you. You can point a colleague to the folder and they’re in, with no one-off links to manage.

It’s also worth sharing a link instead of emailing a copy. When everyone opens the same file in OneDrive or SharePoint, they’re all looking at the current version, and you avoid ending up with five slightly different copies attached to five different emails.

Why this matters

Putting files in the right place saves you real trouble later.

Take what happens when someone leaves. Their personal OneDrive isn’t shared by default, so any important work kept only there can be hard to reach. Microsoft holds a deleted user’s OneDrive for 30 days by default and gives their manager access, but that turns into a rush against the clock. Files kept in SharePoint stay with the team no matter who comes or goes.

It also makes files easier to find. When the team’s documents live in one shared SharePoint library, people know where to look, instead of hunting through inboxes and personal drives.

And it helps you recover from mistakes. Both OneDrive and SharePoint keep older versions of your files and a recycle bin, so if a document gets overwritten or ransomware scrambles your files, you can roll back to a clean copy instead of starting over.

How to get it right

• Put shared work in SharePoint or Teams. Anything the team works on together belongs in a shared library. Keep it out of one person’s OneDrive.
• Keep OneDrive for your own files. Drafts and personal work are fine there. Just don’t let it become the only home for something the team needs.
• Get files off local desktops. A file saved only on a laptop isn’t backed up, isn’t shared, and is gone if the laptop is lost. Move important files into OneDrive or SharePoint. You can still work from your computer the way you always have: the OneDrive app keeps a copy on the device for offline use and saves your changes to the cloud automatically.
• Agree where things go. A simple, shared rule, like “client files live in the client’s SharePoint folder,” saves endless confusion later.
• Use version history when you need it. If a file gets changed or deleted by mistake, you or your IT provider can restore an earlier version rather than redoing the work.

Frequently asked questions

What’s the difference between OneDrive and SharePoint in one line?

OneDrive is for your own work files. SharePoint is for files your team shares.

Where do files in a Teams channel get stored?

In SharePoint. Every team has a SharePoint site behind it, and the Files tab in a channel is a view into that site. Uploading a file to Teams is the same as putting it in SharePoint.

Should I keep work files on my computer’s desktop?

Try not to, for anything important. A file only on your desktop isn’t shared or backed up, and it’s gone if the device is lost or breaks. Save it to OneDrive or SharePoint instead, where it’s protected and reachable.

What happens to files in someone’s OneDrive when they leave?

By default, Microsoft keeps a deleted user’s OneDrive for 30 days and gives their manager access, and that window can be extended if it’s set up in advance. It’s recoverable, but it’s far easier if shared work was in SharePoint to begin with.

Can I get back a file that was deleted or changed by mistake?

Usually, yes. OneDrive and SharePoint both keep a recycle bin and older versions of files, so you can restore a deleted file or roll back to an earlier version. Your IT provider can help if you can’t find it.

Sources and further reading

• Microsoft: Should I save files to OneDrive or SharePoint? — Microsoft’s own guidance on which to use.
• Microsoft: File storage in Microsoft Teams — how Teams files are stored in SharePoint.
• Microsoft: Set the OneDrive retention for deleted users — what happens to a leaver’s OneDrive and the 30-day default.

If your files are scattered and you’re not sure what should sit where, your IT provider can set up a simple structure in SharePoint and move things into the right place, so files are easy to find and safe when people come and go. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.

Your website is one of those things you set up once and then stop thinking about. It sits there doing its job, so there’s no reason to touch it. That’s exactly why a neglected website is one of the common ways a small business gets hacked.

Most small-business sites run on WordPress, which powers more than 40% of all websites, according to W3Techs. WordPress itself is solid. The risk is usually the plugins and themes added to it, which often don’t get updated for years.

How a neglected website gets hacked

Attackers don’t usually pick your business by name. They run automated tools that scan huge numbers of websites looking for known weak spots, like a plugin with a security hole that hasn’t been fixed. When the tool finds one, it breaks in. It’s all automatic, and it isn’t aimed at you personally.

That’s why old plugins are the problem. When a plugin maker finds a security flaw, they release an update to fix it. Until you install that update, the hole stays open, and the automated scanners know exactly what to look for. Security researchers who track WordPress flaws find that the large majority are in plugins and themes, not in WordPress itself.

What a hacked website is used for

A hacked website rarely announces itself. Instead of shutting your site down, attackers usually keep it running and use it for their own purposes:

• Serving malware. Your site gets changed so that visitors are infected or pushed to a page that tries to install something.
• Spam and scam pages. Attackers add hidden pages selling fake goods or pushing scams, riding on your site’s good standing with search engines.
• Stealing form data. If your site has a contact or checkout form, a hacked site can copy what people type into it, including personal or payment details.
• Redirects. Visitors who click your link get sent somewhere else, often a scam or malware site.

The damage lands on you even though the attacker was after your visitors. Search engines flag hacked sites with warnings and drop them down the rankings, and browsers may block them, so customers see a red “this site may be dangerous” screen instead of your homepage.

Is your website at risk?

It depends on how your site is built.

If you use a hosted website builder like Wix, Squarespace, or Shopify, most of the security and updates are handled for you behind the scenes, so your risk is lower.

If you have a self-hosted WordPress site, usually set up by a web designer or agency on your own hosting, then keeping WordPress, the plugins, and the themes updated is someone’s job. The question is whose. On a lot of small-business sites, the honest answer is that nobody has touched it since it launched.

You can usually tell your site is at risk if you don’t know who maintains it, it hasn’t been updated in a year or more, or it’s running plugins from a developer who has since disappeared.

How to keep your website safe

• Keep everything updated. WordPress, plugins, and themes all need updating when new versions come out. Many sites can be set to update automatically.
• Remove plugins you don’t use. Every extra plugin is another thing that can go wrong. If you’re not using it, delete it.
• Stick to well-known plugins. Use ones that are popular, well-reviewed, and updated recently. Avoid anything that hasn’t been touched in years.
• Watch for abandoned plugins. Sometimes a plugin stops being updated, or gets removed from the plugin store because of a security problem. When that happens it stops getting fixes, so check now and then that the plugins on your site are still supported, and replace any that aren’t.
• Lock down the admin login. Use a strong, unique password for the website’s admin account, and turn on multi-factor authentication if your setup supports it.
• Add a security plugin or web firewall. A reputable one can block common attacks and warn you when something changes. Your web host or IT provider can recommend one.
• Keep backups. If the worst happens, a recent backup lets you restore the site instead of rebuilding it from scratch.
• Know who’s responsible. Decide who looks after updates and security, whether that’s your web designer, your IT provider, or your hosting company, and make sure it’s clearly somebody’s job.

What to do if your site is hacked

If your site does get hacked, moving quickly limits the damage:

• Get help straight away. Cleaning a hacked site properly is a job for your web host, IT provider, or a website security service. Most hosts have dealt with this many times and can help.
• Take the site offline. Putting up a simple “down for maintenance” page stops visitors from being harmed while it’s cleaned up.
• Change the passwords. From a device you know is clean, change the passwords for your hosting account and the website’s admin login, and turn on multi-factor authentication.
• Restore a clean backup. If you have a backup from before the hack, restoring it is often the fastest fix. If you don’t, the site will need to be cleaned by hand.
• Update and tidy up before it goes back live. Update WordPress, the plugins, and the themes, and remove anything you don’t recognize or no longer use, so the same hole doesn’t get used again.
• Tell anyone whose data was affected. If the site handled customer details or payments, check whether any of that was exposed, and let those people know if it was.

Frequently asked questions

How do I know if my website has been hacked?

Common signs are a warning from Google or your browser, a drop in search traffic, pages or pop-ups you didn’t add, or your web host getting in touch about a problem. If you’re not sure, your IT provider or web host can check.

Do I need to update my website if it works fine?

Yes. A site can look completely normal to you while an out-of-date plugin leaves a door open for attackers. Updates close those holes, which is why they matter even when nothing looks wrong.

I use Wix or Squarespace. Am I at risk?

Much less so. Hosted builders handle the updates and most of the security for you. You should still use a strong admin password and MFA, but you’re not responsible for patching plugins the way a self-hosted WordPress site is.

Who should maintain my website?

Someone should own it clearly: your web designer or agency, your IT provider, or your hosting company, depending on your setup. The important thing is that someone is actually doing the updates.

What is a security plugin or web firewall?

It’s a tool that sits on your website, blocks common attacks, watches for changes, and can alert you to problems. On WordPress, a reputable security plugin is a common, low-cost way to add that protection.

Sources and further reading

• W3Techs: WordPress usage statistics — the share of websites that run on WordPress.
• Patchstack: WordPress vulnerability report — research showing most WordPress security holes are in plugins and themes.
• NCSC: Small Business Guide — UK guidance on keeping software updated and patched.

If you’re not sure whether your website is being kept up to date, or who’s responsible for it, that’s worth sorting out before something goes wrong. Your IT provider or web host can check where things stand and take over the upkeep. And if you don’t have an IT provider, feel free to reach out to us and we’ll help you sort it.

—

Featured Image Credit

This Article has been Republished with Permission from The Technology Press.